Type of Construction
Heavy structure with Pre Fabricated Sandwich Panels on all sides fit together by reinforcement.
Insulated wall thickness 80mm (Small Vehicle), 100mm (Mini Truck) & 125mm (Heavy Loading Truck)
Outside Pre coated GI sheet Skin Thickness 0.8 mm or S.S. grade 304, Thickness 0.5mm Inside Pre coated GI sheet Skin Thickness 0.8mm or S.S. grade 304, Thickness 0.5 mm.
Type of Floor
We are providing outside Pre coated GI sheet of Thickness 0.8mm & Inside 9mm or 19mm Marine Ply with FRP layer for water proof & top material as per below details
Single loft Door for Small Vehicle & Double Loft Door for Mini and Heavy Loading Truck
Door & Window
Single & Double loft (fully open) insulated doors, hatch door (Window) & side door fitted with double gasket with heavy door locking mechanisms for special transport segment. Drop “T” handles gear, Rear door hinges, Rear door hinges bracket, Seals Rubber Gasket
Door Curtain As per customer requirement we provide you PVC Door curtain. As per your door size
Base Frame Between container & body chassis, it is design on M.S. profile with laser cut aesthetic look & M.S. pipe frame will be complete with U bolts & Fasteners.
Ladder for UP and DOWN on Container Useful for up down on container & easy services for refrigeration unit for large truck. Totally strong & welding with container
REFRIGERATED & EUTECTIC MOBILE CONTAINER WITH GRP PANEL
GRP stands for "glass-fibre reinforced plastic", a high grade composite material, consisting of polyester resin reinforced with glass fibre matting.
GRP is highly suitable for refrigerated containers with higher stability, low weight and for exceptional resistance to Corrosion.
F-Max - Eutectic Mobile Container is designed for multi deliveries of Ice cream, Frozen Foods, Bakery Products and Fruits & Vegetables distribution.
F-Max -Eutectic System are designed to operate in vehicles that have been suitably insulated for fresh or frozen produce transportation. The Eutectic Plates are mounted inside a chamber which is separate from the main load system. The product inside the storage compartment is cooled on required temperature either for Frozen Application (-24°C) or Chilled Application (+2°C to 8°C) by the PCM pads. The connected power supply to charge should be 3 phases or 1 phase.
For Frozen Application: 100 mm + 25 mm (Eutectic Plate)
For Chilled Application: 80 / 100 mm + 25 mm (Eutectic Plate)
Refrigeration System: Air Cooled With Electric Support
Compressor Type: Semi sealed / Scroll compressor
Unit Running Time:
For Frozen Application: 10 to 12 Hr.
For Chilled Application: 4 to 5 Hr.
For Frozen Application: -24°C after charging & -12°C after 12 To 14 Hr.
For Chilled Application: 0°C after charging & +4°C after 4 to 5 Hr.
Back up time:
For Frozen Application: 12 to 14 Hr.
For Chilled Application: 4 to 5 Hr.ICE MAKE
#44,1st Street, Tatabad,
Coimbatore - 641012,